Show Platform Hardware - Cisco ASR 901 Command Reference Manual

show platform hardware

show platform hardware
To display the status of hardware devices on the Cisco ASR 901, use the show platform hardware
command. The command displays information about hardware devices on the Cisco ASR 901 for
troubleshooting and debugging purposes.
Syntax Description adrian
bits
cpld
cpu
ethernet
fio
hwic
rtm
stratum
ufe
winpath
Command Modes Privileged EXEC
Command History Release
15.1(2)SNG
Related Commands Command
show controller
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-168
show platform hardware {adrian | bits | cpld | cpu | ethernet | fio | hwic | rtm | stratum | ufe
winpath
Displays information about the adrian hardware.
Displays information about the BITS hardware.
Displays information about the CPLD hardware.
Displays information about the CPU.
Displays information about the ethernet interfaces on the Cisco ASR 901.
Displays information about the FIO fpga hardware.
Displays information about the HWICs installed on the Cisco ASR 901.
Displays information about the RTM Module (ASM-M2900-TOP daughter card).
Displays information about the stratum hardware.
Displays information about the UFE hardware.
Displays information about the Winpath hardware.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Description
Displays the status of system controllers.
Chapter 1 CLI Command Reference
OL-26031-07