Memory Functions; Formatting The Memory Card (Dtx-1800 And Dtx-1200) Or Internal Memory; Setting The Storage Location (Dtx-1800 And Dtx-1200) - Fluke DTX Series User Manual

DTX Series CableAnalyzer
Users Manual

Memory Functions

All DTX testers have internal memory that can store at
least 250 Autotest results, including graphical data. The
maximum capacity of internal memory depends on the
space taken by the tester's software.
The DTX-1800 and DTX-1200 testers can also store up to
4000 Cat 6A Autotest results, including graphical data, on
a 128 MB card. The testers can also use secure digital (SD)
memory cards.
The card capacities supported depend on the DTX
software version. See the Fluke Networks Knowledge Base
on the Fluke Networks website for details.
W
Caution
Memory cards may be lost, damaged, or
accidentally formatted, resulting in data loss.
Therefore, Fluke Networks recommends saving
no more than one day's worth of test results on
a memory card.
54
Formatting the Memory Card (DTX-1800 and DTX-
1200) or Internal Memory
Formatting erases all contents of the memory card or
internal memory.
To format the memory card or internal memory:
1 Turn the rotary switch to SPECIAL FUNCTIONS, then
select Memory Status.
2 For a DTX-1800 or DTX-1200 with a memory card
J
installed, press to select the memory card or
internal memory.
K
3 Press Format.
Setting the Storage Location (DTX-1800 and DTX-
1200)
To set the destination for saved results turn the rotary
switch to SETUP, select Instrument Settings, select Result
Storage Location; then select Internal Memory or Memory
Card (if present).