Autotest Summary Results For Twisted Pair Cabling - Fluke DTX Series User Manual

Autotest Summary Results for Twisted Pair Cabling

Figure 13 describes the Autotest Summary screen.
A
PASS: All parameters are within limits.
FAIL: One or more parameters exceed the limit.
PASS*/FAIL*: One or more parameters are within the tester's
accuracy uncertainty range, and the "*" notation is required by the
selected test standard. See "PASS*/FAIL* Results" on page 30.
B
Press
C
If the test failed, press
D
Action prompt for the screen. Use
parameter; then press
E
E
i
: The parameter was measured, but has no PASS/FAIL limit in the
selected test limit.
X
U
amd77f.eps
F
The worst margin found for the test.
Figure 13. Autotest Summary for Twisted Pair Cabling
K L
or to scroll the screen.
J
H
.
: The test passed.
: The test failed.
: See "PASS*/FAIL* Results" on page 30.
Certifying Twisted Pair Cabling
for diagnostic information.
D A
to highlight a
29