Overview Of Memory Functions; Options For Cable Ids - Fluke DSX 5000 CableAnalyzer User Manual

DSX CableAnalyzer
Users Manual

TEST AGAIN: This button shows if the test failed. Tap this button
to do the test again for the same ID. If Auto Save is on, the tester
saves subsequent results with the same ID. If Auto Save is off,
you can save the result if necessary. When you look at a result
that failed, tap TEST AGAIN to do the test again for the same ID
and with the same test settings as the saved result.

TEST (yellow): This button shows if the test passed and Auto
Save is on. When Auto Save is on, the tester saves results with
the next available ID when the test is completed. When you tap
TEST, the tester does a test for the next available ID.

: Press  to do the test shown on the home screen for
the Next ID.

Overview of Memory Functions

You can save approximately 12,700 Cat 6A Autotest results, with
plot data included.
The capacity available for test results depends on the space used
by the software and custom test limits in the tester.
To see the memory status
On the home screen, tap the TOOLS icon, then tap Memory
Status.
To make more memory available, you can export results to a USB
flash drive, then delete the results in the tester. See "Manage
Results on a Flash Drive" on page 54.

Options for Cable IDs

When you save the test results for a cable, you usually give the
results the name that is the ID for the cable. There are several
methods you can use to make IDs for test results:
22
riešenia na presné meranie