Table of Contents
Advertisement
About Saving Tests
You can save test results on a removable memory card
or in the tester's internal memory. The tester can use
MultiMediaCard (MMC) or Secure Digital memory
cards (SD).
To select a location for saving tests, press
select CURRENT FOLDER on the Job tab.
Tip: To avoid confusion regarding the location of test
records, save test results on a memory card
whenever possible.
You can save results from any fiber test, except the
real time trace.
Each test record can hold bi-directional results from
each type of test (except ChannelMap, which you run
in just one direction). The test direction assigned to
saved results is determined by the THIS END setting (in
S
then
Setup) used when the test was run.
Chapter 9
Memory Functions
9-1
Advertisement
Table of Contents
