Overview Of Memory Functions; Options For Cable Ids - Fluke CableAnalyzer DSX-602 User Manual

DSX-602 CableAnalyzer
Users Manual

Overview of Memory Functions

You can save approximately 12,700 Cat 6A Autotest results, with
plot data included, in the DSX-602 main tester.
The capacity available for test results depends on the space used
by the software and custom test limits in the tester.
To see the memory status
On the home screen, tap the TOOLS icon, then tap Memory
Status.
To make more memory available, you can export results to a USB
flash drive, then delete the results in the tester. See "Manage
Results on a Flash Drive" on page 72.

Options for Cable IDs

When you save the test results for a cable, you usually give the
results the name that is the ID for the cable. There are several
methods you can use to make IDs for test results:
You can use the CABLE ID SETUP screen to make a set of

sequential IDs. The tester uses the IDs in sequence as the
names for the results you save. When Auto Save is on, the
tester automatically saves each result with the next available
ID in the set.
A cable ID set also lets you use IDs again so you can add
different results to tests you saved before.
You can enter an ID each time you do a test. To do this, turn

off the Auto Save function (see page 23). Each time a test is
completed, tap SAVE (if the test passed) or FIX LATER (if the
test failed), then enter an ID manually.
You can use LinkWare PC software to make a set of IDs,

download the set to the tester, then import it into a project.
 After you do a test, you can enter the ID for a test you saved
before. This lets you replace results.
22