Fluke DTX Series User Manual page 43

Setting
SETUP > Instrument
Settings > Store Plot
Data
SPECIAL FUNCTIONS >
Set Reference
Settings for saving
tests
Table 3. Coaxial Cable Test Settings (cont.)
Standard: The tester displays and saves plot data for insertion loss. The tester saves data for
the frequency range required by the selected test limit.
Extended: The tester saves data beyond the frequency range required by the selected test
limit.
No: Plot data is not saved, which lets you save more results. Saved results show only worst
margins and worst values for each pair.
The tester must be referenced to the smart remote the first time the two units are used
together. You should also set the reference every 30 days. See "Setting the Reference for
Coaxial Cabling" on page 32.
See "Preparing to Save Tests" on page 19.
Description
Certifying Coaxial Cabling
35