DTX Series CableAnalyzer
Users Manual
Monitoring Network Traffic
The traffic monitor lets you identify active cables and check
a network's basic health.
1
Turn on the tester; then connect to the network as
shown in Figure 23 on page 45.
2
Turn the rotary switch to MONITOR; then run the
Network Connectivity test.
Blinking a Port Light
The Port Blink function helps you quickly locate a link's port
at a switch or hub. This function generates a link pulse on
pairs 12 and 36 to blink the port's activity LED.
1
Connect to the network as shown in Figure 23 on page
45.
2
Turn the rotary switch to MONITOR, select Network
Connectivity; then press
50
P
.
J
3
Press
Traffic. Figure 26 describes the traffic
monitor screen.
Traffic monitor results cannot be saved.
K
3
Press
Port Blink. A square on the hub/switch icon
on the Network Connectivity screen blinks when the
port blink function is active.
4
Look for a blinking activity LED on the hub or switch.
Note