Updating With Another Tester - Fluke DTX Series User Manual

DTX Series CableAnalyzer
Users Manual

Updating with Another Tester

You can update a tester's software using another tester
that is already updated.
1 Use link interface adapters to connect an updated
tester or smart remote to a tester or smart remote that
needs updating (Figure 29).
One of the testers must be a main tester.
2 Turn on both testers. The testers compare software
versions. If one has more recent software, the main
tester prompts you about updating the older
software.
K
3 Press OK to start the update process.
4 To verify the update, turn the rotary switch to SPECIAL
FUNCTIONS; then select Version Information.
66
Note
F1 F2 F3
EXIT TEST
ENTER
SAVE
AUTO
TEST
SINGLE SETUP
TEST
SPECIAL
MONITOR FUNCTIONS
TALK
F1 F2 F3
EXIT TEST
ENTER
SAVE
AUTO TEST
SINGLE SETUP
TEST
SPECIAL
MONITOR FUNCTIONS
TALK
Figure 29. Updating the Software with an Updated
Tester
PASS
TEST
FAIL
TALK
TONE
LOW BATTERY
TEST
TALK
F1 F2 F3
EXIT TEST
ENTER
SAVE
AUTO
SINGLE TEST SETUP
TEST
SPECIAL
MONITOR FUNCTIONS
TALK
amd73f.eps