Identifying Links (Twisted Pair Only) - Fluke DTX Series User Manual

DTX Series CableAnalyzer
Users Manual

Identifying Links (twisted pair only)

The ID Locator function helps you quickly identify link
connections at a patch panel. This function requires one or
more optional Fluke Networks LinkRunner
locators.
ID locator results cannot be saved.
1 Connect the tester and ID locator(s) as shown in Figure
27.
2 Turn the rotary switch to MONITOR, select ID Locator;
P
then press .
52
™
Cable ID
Note
3 Connect the tester to different jacks, pressing
rescan each time, until Found Cable ID and the
identifier's number appears.
Wiring faults may cause the tester to misidentify
the ID locator's number, or prevent the tester from
detecting the locator.
P
Note
to