Memory Functions; Viewing Results; Deleting Results; Uploading Results To A Pc - Fluke DTX-CLT CertiFiber User Manual

Memory Functions

The DTX-CLT CertiFiber can store a minimum of 3300
Autotest results from single or bi-directional tests on fiber
cabling. The maximum capacity of internal memory
depends on the space taken by the tester's software.

Viewing Results

To view saved results, do the following:
1 Turn the rotary switch to SPECIAL FUNCTIONS; then
select View/Delete Results.
J
2 If necessary, press
result you want to view.
3 Highlight the result; then press

Deleting Results

To delete results or folders, do the following:
1 Turn the rotary switch to SPECIAL FUNCTIONS, then
select View/Delete Results.
J
2 If necessary, press
results you want to delete.
3 Do one of the following:
Change Folder to find the
H
.
Change Folder to find the
• To delete one result, highlight it, press
L
press Delete; then press
• To delete all results in the current folder, the current
folder, or all results in the tester (internal memory),
K
press Delete; then select an option. Press
L
Delete; then press

Uploading Results to a PC

To upload results to a PC, do the following:
1 Install the latest version of LinkWare software on your
PC.
2 Turn on the tester.
3 Connect the tester to the PC with the USB cable
provided.
4 Start LinkWare software on the PC.
5 Click Import on the LinkWare toolbar. Select the
tester's model from the list.
The DTX-CLT CertiFiber shows as "DTX-CLT" on
LinkWare menus.
6 Select the records you want to import; then click OK.
Memory Functions
K
Delete,
L
Yes.
Yes.
Note
L
59