Fluke DTX Series User Manual page 54

DTX Series CableAnalyzer
Users Manual
1
4
5
6
7
8
Figure 24. Network Connectivity Results Screen (DHCP example for twisted pair)
46
A
Speeds supported by the switch or hub: 10 Mbit, 100 Mbit, 1000
Mbit. The current speed is green. Arrows show the connection's
duplex configuration:
2
3
B
PoE shows if you ran the Network Connectivity w/ PoE test and the
device appears to support Power over Ethernet. The tester requests
power from suspected PoE devices.
not supply power during the test.
SFP shows for a fiber link.
C
Crossover indicator (twisted pair only):
•
Green: either the cable is straight-through, or the cable is a
crossover and the hub or switch crossed pairs 12-36 (MDI on the
Negotiation Details screen).
9
•
Orange: the tester compensated for a crossover cable by crossing
pairs 12-36 (MDI-X on the Negotiation Details screen).
amd06.eps
shows if the device did
-continued-