Table of Contents
Advertisement
General safety regulations
Attention! Mounting, installation, commissioning and repair of electronic devices have
!
to be carried out only by qualified electricians. Thus, the valid standards and instruc-
tions for the installation of electrical systems have to be observed.
When working on systems with a main connection of 230 V alternating voltage, the safety
requirements according to DIN VDE 0100 have to be observed.
During the installation of TCS:BUS systems the general safety regulation for telecommuni-
cation systems according to VDE 0800 have to be observed. Inter alia:
separated conduit of heavy current and low current lines,
minimum distance of 10 cm in case of a common conduit,
use of separators between heavy and low current lines when using shared cable ducts,
use of standard telecommunication lines, e.g. J-Y (St) Y with a diameter of 0.8 mm,
existing lines (modernisation) with deviating cross-sections can be used in compliance
with the loop resistance.
Installation – protective measures
With suitable maesures to protect against lightning it has to be ensured that a voltage
!
of each 32 V DV is not to be exceeded at the connections a, b, P, E, M, V1, V2, C.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
4
Safety instructions
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
07/2012
Advertisement
Table of Contents
