Table of Contents
Advertisement
Internal calls
Send an internal call
Max. 10 internal calls can be defined with the configuration software configo™ .
Press the menu button. Select the symbol send in-
ternal call
Or call the menu with the function key,
.
if the device is configured accordingly.
Select the required call destination with the naviga-
tion buttons UP or DOWN.
Trigger a call by pressing the menu button.
An acknowledgement tone sounds. The OSD is
switched off (or switches back to the live image).
If the call is accepted at the called indoor station
another acknowledgement tone sounds.
Receive an internal call
If the indoor station receives an internal call, whose
sender includes the individual serial number, this
number is displayed.
If the name of the calling indoor station is pro-
grammed (with the configuration software
configo™), the name is displayed.
Control functions
Send and display s control functions
Max. 10 control functions can be defined with the configuration software configo™.
Triggering a control function can have three different effects:
A control protocol is sent (no information on the menu)
Two different control protocols are sent alternating (red/green point in the menu). The
color of the point indicates the triggered switching process, but not the actual condition
of the device that is to be switched.
One control protocol is sent and the execution of the switching process is displayed in
the menu by a red/green point.
Press the menu button. Select the symbol send
control function
function key, if the device is configured accordingly.
Select the required function with the navigation but-
tons UP or DOWN.
Triggering by pressing the menu button. An
acknowledgement tone sounds. The OSD is swit-
ched off after 5 sec (or switches to the live image).
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
Or call up the menu with the
.
26
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
07/2012
Advertisement
Table of Contents
