07/2012
symbol
meaning
ring tone volume
ring tone selection for door calls ≤ audio AS-border, door calls > audio AS-
border
ring tone selection for floor calls
ring tone selection for incoming internal calls
ring tone selection for sub door call 1, 2, 3, 4
0, 1, 2, ... indication of the adjusted value
Setting the ring tone volume
Press the navigation buttons RIGHT (or LEFT) and
go to the symbol ring tone volume
Press the navigation buttons UP or DOWN to se-
lect the volume. The level of the ring tone volume
(e.g. 4) is displayed (1 to 4).
When selecting a ring tone, the ring tone sounds
immediately.
Ring tone selection
Press the navigation button RIGHT (or LEFT) and
go to the symbol ring tone selection
(e.g. for door 2)
Press the navigation buttons UP or DWON to se-
lect the ring tone. The number of the ring tone (e.g.
11) is displayed.
When selecting a ring tone, the ring tone sounds
immediately.
Setting the image parameter
Symbols in the live image
The symbols in the live image are displayed for
10 sec when activating the image (after pressing
the image button or after receiving a door call) or
for 3 sec after pressing the speech button.
Press the image button or the speech button to
switch on the live image.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
.
.
21
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
4