Mounting And Installation; Install The Lower Cover; Mounting Height; Fixing The Surface-Mount Box - TCS IVW3012-0110 Product Information

07/2012

Install the lower cover

Attention!
!
The video indoor stations have to be installed and disassembled only without voltage!
Ensure that the screws are not over tightened when installing the surface- / flush-
mount box on uneven ground. If the screws are over tightened the surface- / flush-
!
mount box could deform. Then, it is possible that the device cannot be installed cor-
rectly.

Mounting height

For an optimal viewing angle we recommend a mounting height of 1.6 meter (top edge of
the device above the floor).

1 Fixing the surface-mount box

Insert the lines through the cable gland.
Fix the surface-mount box with suitable screws to the wall.
Ensure the correct position: The arrow must face upwards!
attachment
holes
cable gland
cable compartment
(height ca. 10 mm)
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
9

Mounting and installation

arrow for orientation
1
2
connector socket
!
surface-mount box
3
support plate (4 x)
connection cable of the front panel unit
Subject to technical changes.
PI_IVW3012_0x10_uk.doc