Activating / Deactivating Zoom Mode; Navigating In The Image With The Four Navigation Keys; External Image Buffer; Activating / Deactivating The Automatic Image Storage - TCS IVW3012-0110 Product Information

07/2012
Activate / deactivate zoom mode
The zoom mode can only be activated if a camera, with zoom function, is connected.
The zoom mode can be activated, if the live image is displayed: after an incoming door
call or after pressing the image button or speech button.
Press the image button longer than 4 sec to activate the zoom mode.
The symbol zoom mode activated
Press the navigation buttons UP or DOWN to enlarge or reduce the image.
Press the navigation buttons RIGHT or LEFT to deactivate the zoom mode or automatic
deactivation after 4 sec.
Navigation within the image with the four navigation buttons
A camera with swivel function can be controlled with these buttons.

External image buffer

Images (or image sequences) can be stored with the external image buffer FVM1000. The
number of images per device is limited to 64, before the oldest image will be overwritten.
Make sure that the video indoor station IVW3012 is ready for operation.
Adjust the operation mode to comfort at the FVM1000.
End the programming mode.
Thus, the video indoor station IVW3012 recognizes
the FVM1000, an acknowledgement sounds.
The symbols of the image buffer for automatic image
buffering activated
age buffer are visible in the main menu.
Note: The automatic image buffering is not activated.
Activate / deactivate the automatic image buffering
To activate the automatic image buffering, press
the button image button until an acknowledgement
tone sounds (longer than 4 sec) and the image
buffer indication lights yellow.
The symbol image buffer
image.
When receiving a door call, an image is stored auto-
matically.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
is displayed in the live image.
time setting and delete im-
,
is displayed in the live
23
Subject to technical changes.
PI_IVW3012_0x10_uk.doc