Table of Contents
Advertisement
07/2012
unlimited communication time
(limit is set only by the device to which the
communication is established)
fixed simplex communication
simplex communication to the front-
door station
permanent image activation
receiving / blocking short messages
Programming of the function key with the Service Device
The indoor station is acting as an intercom simplex communication device.
Use the orders "9" to configure comfort intercom simplex communication devices (see
product information Service Device):
A programming with the orders "9" has to be initiated once with the order *95#ser. no.#.
Then the programming of the function key has to be realised with the Service Device.
initiation
call diversion
door release automatic
internal call
control function 8
restore light switch function
parallel allocation
Note: Deaktivating the parallel allocation
means the automatically allocation of the
serial number 0.
ser. no.
=
serial number of the indoor station which has to be newly configured
targetSno. =
serial number of the target indoor station to which the call is to be redirected
intSno.
=
serial number of the target indoor station to which internal calls are made
ParSno.
=
serial number of the indoor station, to which the indoor station which hast o be newly configured is
allocated to
Help function
For facilitating the operation of the device, symbols
are faded in in the right upper corner when the live
video image is activated or the main or sub menus
are called. The symbols indicate the buttons that are
available in the corresponding screen (e.g. menu
control functions). The fade-in automatically ends
after 5 seconds or after the first keystroke.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
17
–
–
–
–
–
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
–
x
–
x
–
x
–
x
–
x
Advertisement
Table of Contents
