To deactivate the automatic image buffering, press the image buffer button until an
acknowledgement tone sounds (longer than 4 sec) and the image buffer indication turns
off. The symbol image buffer
Store an image manually
When in image buffer mode, an image can be stored
manually.
Press the image buffer button shortly to store an
image.
The image is displayed briefly and the recording
time is faded in.
The image buffer indication is blinking until the
image has been seen.
View stored images
If the image buffer indication is blinking, new im-
ages were stored.
Press the image buffer button to display the picture
from the image buffer. Or press the menu button.
Select the symbol image buffer
tion buttons and confirm the selection by pressing
the menu button.
The picture of the image buffer is displayed.
Browse through all new stored images with the
navigation buttons LEFT or RIGHT.
Delete a stored image
Press the menu button. Select the symbol image
buffer
. Confirm the selection by pressing the
menu button.
Select the image which is to be deleted.
Press the navigation button DOWN for 4 sec. An
acknowledgement tone sounds. The image will be
deleted, the image stored last is displayed.
If all stored images for the allocated serial number
in the FVM1000 are deleted or if no images are
available when calling up the menu, the illustrated
screen (see picture to the right) is displayed for 4
sec. Then the main menu appears again.
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
24
is faded out of the live image.
with the naviga-
Gespeichertes Bild mit
Datum, Uhrzeit, Bild Nummer von insge-
samt gespeicherten Bildern
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
07/2012