1 Fixing the flush-mount box
Insert the lines through the cable gland.
Fix the flush-mount box with suitable screws to the wall or in the cavity wall. Ensure the
correct position: The arrow must face upwards!
The flush-mount box should be flush with the wall.
guide holes (2 x)
attachment
holes
cable gland
cable compartment
(height ca. 10 mm)
2 Connecting the lines
Use a suitable small screwdriver to connect the lines and to avoid damaging the de-
!
vice.
Strip insulation of the line ends.
Connect the lines according to the connecting diagram (see also labeling at the type
label).
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
butterfly nuts
(4 x)
1
connector socket
10
arrow for
orientation
gspfeil
2
!
connection cable of the front panel unit
Subject to technical changes.
PI_IVW3012_0x10_uk.doc
flush-mount box
3
support plate (2 x)
07/2012