Adjust The Ring Tone Volume; Configuration; Configuration Options; Programming With The Service Device Tcsk-01 - TCS ISH3022 Product Information

Adjust the ring tone volume

 Use a small screwdriver to turn the ring tone
volumel.
 To increase the volume, turn the ring tone volume
control (middle hole in the lowest line of the loud-
speaker drillings) clockwise.

Configuration options

Function
ring tone volume
parallel allocation
reload to factory setting

Programming with the Service Device TCSK-01

 The indoor station is acting as a telephone.
 Use the commands "8" for configurations (see product information Service Device
TCSK-01).
search telephones
switch ON parallel call
switch OFF parallel call
Ser.-Nr. = serial number of the indoor station that is to be configured new
ParSNr. = serial number of the indoor station, to which the new configured indoor station must be allocated to
Note: block ring tone output
The ring tone output can be blocked with the switch "call OFF" at the Service Device TCSK-01 for 4 min.
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
FAX: +49(0) 41 94/ 9 88 129
10

Configuration

manually
x
–
–
configo
TCSK-01
as of version 1.3.3
–
x
–
0
Subject to technical changes.
PI_ISH3022-uk
11/2012
TM
–
x
x