Ring Tone Selection; Adjust The Volume - TCS ISW3130 Product Information

Comfort indoor station for hands-free talking
Hide thumbs Also See for ISW3130:
Table of Contents

Advertisement

07/2015

Ring tone selection

For 4 different incoming calls (door calls from 2 different front-door stations, floor call, in-
ternal call) different ring tones can be selected.
1
End voice communication. Press call OFF button for around 8 seconds.
Both LEDs are ON and an acknowledgement tone sounds, the ring tone selection
is activated.
By pressing the following buttons, a ring tone can be selected. You can choose be-
tween 13 different tones.
Select door ring tone
2a
of the front-door
station*
2b
select door ring tone
of the floor door
2c
select internal ring
tone
3
Short press the call OFF button.
Or: If no button is pressed for around 8 sec, the device end the ring tone selection
automatically. Both LEDs go out and an acknowledgement tone sounds, the ring
tone selection is deactivated.
* The ring tone is identical for all front-door stations and can be selected only identically for all.
To select a second ring tone it is necessary to activate the call distinction by changing the audio AS limit.
Changing the audio AS limit is possible only with the configuration software configo™.

Adjust the volume

Adjustable in 8 steps. A signal tone reproduces the adjusted ring tone volume when turn-
ing the ring tone volume control. If the adjustment is finished, the adjusted ring tone
sounds in the adjusted volume.
voice volume
ring tone volume
TCS TürControlSysteme AG
E-Mail: hotline@tcsag.de • www.tcsag.de
Press the door release button until the required ring tone
sounds. The ring tone selected last is stored.
Press the light switch button until the required ring tone
sounds. The ring tone selected last is stored.
Press the control key until the required ring tone sounds.
The ring tone selected last is stored.
Turn the ring tone volume control when a conversation is estab-
lished (preset ex works: volume step 4 out of 8)
Turn the ring tone volume control when no conversation is estab-
lished (in stand-by; preset ex works: volume step 6 out of 8)
11
Subject to technical changes.
PI_ISW3130-uk
2 A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Isw3130-0140

Table of Contents