Adjust The Volume; Configuration Options; Programming With The Service Device Tcsk-01 - TCS ISH3030 Product Information

Adjust the volume

Each adjustable in 8 steps
volume voice
volume ring tone
 A signal tone is reflecting the adjusted volume when turning the volume control of the
ring tone.
 If the setting is finished, the adjusted ring tone will be reflected in the adjusted volume.
function
ring tone volume
voice volume
selecting ring tones for door
calls, internal calls and floor calls
ring tone for door call 2
parallel allocation
change audio AS limit
block ring tone output
block ring tone selection
reset to factory settings

Programming with the Service Device TCSK-01

 The indoor station is acting like a telephone.
 Use the commands „8" for configuration (see product information Service Device TCSK-
01).
search telephones
activate parallel call
deactivate parallel call
Ser. No. =the serial number of the new indoor station, that should be configured
ParSNo. =the serial number of the indoor station, to which the new configured indoor station is allocated
TCS TürControlSysteme AG
Mail: hotline@tcsag.de
12
Turn the volume control of the ring tone when a voice communi-
cation is established
(adjustment ex works: volume step 6 from 8)
Turn the volume control for ring tone when the handset is hooked
on (no voice communication)
(adjustment ex works: volume step 7 from 8)

Configuration options

manual TCSK-01
–
x
–
x
–
x
– –
–
x
– –
–
x
– –
Subject to technical changes.
ISH3030-0140 UK
07/2013
TM
configo
from version 1.3.3
x
x
x
x
x
x
–
x
x
2A