Set Image Parameter; Symbols In The Live Image; Set Contrast, Brightness And Color Saturation - TCS Carus Origo CAI2010 Product Information

Set image parameter

Symbols in the live image:

The symbols in the live image are faded-
in for 10 sec by activating the image
(after the image button was pressed or a
door call has been received) or for 3 sec
after pressing the speech button.
 Press the image button or speech
button to activate the live image.
The symbols for ring tone mute, door release automatic, call diversion and image buffer mode are
only displayed when the function is activated.
image from camera AS-
address (e.g. with AS-
05
address 05)
call diversion is activated
automatic image storage is activated; menu image buffer is activated
(only when FVM1000 is installed)

Set contrast, brightness and color saturation

 Press the speech button or the image
button. The image from the video
front-door station is displayed.
 Press the menu button. The menu for
the setting is displayed.
 Press the menu button again to
switch over to the next image param-
eter.
 Press the navigation button UP or
DOWN to change the value of the
image parameter.
The change can be seen immediately
in the video image.
ring tone mute
door release automatic
or
activated
a,b here
short-circuit
31