Configuring Mib-View-Based Access Control In Snmpv1 - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Procedure
l
l
l
----End
Example
Run the display acl acl-number command. If information on the rules of the configured ACL
is displayed, it means that the configuration succeeds.
<Quidway> display acl 2000
Basic ACL
Acl's step is 5
rule 5 permit source 1.1.1.1 0
Run the display snmp-agent community command. If information on the community name is
displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent community
Run the display snmp-agent sys-info version command. If the version of SNMP run on the
agent is displayed, it means that the configuration succeeds.
<Quidway> display snmp-agent sys-info version
SNMP version running in the system:
1.7 Configuring MIB-View-based Access Control in
SNMPv1
In SNMPv1, you can implement the security feature by the MIB view.
1.7.1 Establishing the Configuration Task
Before configuring MIB-view-based access control in SNMPv1, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
1.7.2 Configuring the SNMP Version
By default, the NM Station accesses the device through SNMPv3. To enable the NM Station to
access the device through SNMPv1, you need to configure SNMPv1 on the device.
1.7.3 Creating a MIB View
This part describes how to create a MIB view, and add the MIB of the specified feature into the
MIB view or remove the MIB of the specified feature from the MIB view.
1.7.4 Configuring MIB-View-based Access Control
This part describes how the NM Station manages the specified feature of the switch in the MIB
view.
Issue 03 (2010-09-20)
Run the display acl acl-number command to view the rules of the configured ACL.
Run the display snmp-agent community command to view the community name of the
agent.
Run the display snmp-agent sys-info version command to view the SNMP version
information.
2000, 1 rule
Community name:public
Group name:public
Acl:2000
Storage-type: nonVolatile
Community name:private
Group name:private
Storage-type: nonVolatile
SNMPv2c SNMPv3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-17