Specifying The Upload Mode Of The Statistics File - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bulk-file file-name
The bulk-file view is displayed.
Step 3 Run:
transfer retry retry-times
The maximum times to re-upload the statistics file is set.
----End

1.16.9 Specifying the Upload Mode of the Statistics File

The statistics file is preferentially reuploaded through primary URL. If the primary URL fails,
the secondary URL is used. If the secondary URL also fails, the switch waits for the next reupload
interval to reupload the statistics file.
Context
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bulk-file file-name
The bulk-file view is displayed.
Step 3 Run:
transfer { primary | secondary } url url
The upload mode of the statistics file is set.
The S9300 supports two modes: FTP and TFTP. The two modes are configured as follows:
l FTP: ftp://user name:password@host name or IP address/relative path
l TFTP: tftp://host name or IP address/relative path
1-54
NOTE
The interval for re-uploading the statistics file can be calculated through the formula: period for reserving
the statistics file/(number of times to re-upload the statistics file + 1).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)