Adding Statistics Objects Into The Statistics File; Optional) Configuring The Statistics Collection Interval - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Step 2 Run:
bulk-file file-name
A statistics file is created and the bulk-file view is displayed.
The statistics file is in the Stop state after being created and does not participate in statistics
collection until it is enabled. When the status of the statistics file changes to Ready, it can be
scheduled. When the statistics collection interval expires, the statistics file enters the Running
state and starts statistics collection.
----End

1.16.4 Adding Statistics Objects into the Statistics File

Data needed by the NM Station can be saved in the statistics file only after statistics objects are
added to the statistics file.
Context
You can add a single statistics object, a column of statistics objects or all statistics objects to the
statistics file.
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bulk-file file-name
The bulk-file view is displayed.
Step 3 Run:
object oid class { single | column [ start-index start-index ] [ instance-number
instance-number ] }
Statistics objects are added to the statistics file.
----End

1.16.5 (Optional) Configuring the Statistics Collection Interval

This part describes how to set the interval for collecting the switch performance. You must set
the collection interval before performing the performance batch collection function. Once the
collection is performed, you cannot modify the collection interval.
Issue 03 (2010-09-20)
NOTE
l Statistics objects can be dynamically added or deleted no matter whether the statistics file is in the Stop,
Ready, or Running state.
l Configurations about statistics objects take effect after the next statistics collection begins.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-51