Introduction To Snmp; Figure 1-1 Schematic Diagram Of The Snmp Architecture - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

1.1 Introduction to SNMP

This part describes the NM Station, SNMP agent, and MIB, and their relationships.
The Simple Network Management Protocol (SNMP) consists of the Network Management
Station (NMS) and the agent. SNMP is an application protocol that defines transmission of
management information between the NM Station and the agent.
NM Station
The NM Station is a station on which the client program runs.
The NM Station has the following functions:
l
l
Agent
The agent is a process that is on the managed devices.
The agent has the following functions:
l
l
l
Relationship Between the NM Station and the Agent
Figure 1-1

Figure 1-1 Schematic diagram of the SNMP architecture

Issue 03 (2010-09-20)
Sending various request packets to network devices.
Receiving response packets and Trap messages from the managed devices and showing the
result.
Receiving and analyzing request packets from the NM Station.
Performing the Read or Write operation on management variables according to the type of
packet and generating a Response packet to respond to the NM Station.
Sending a Trap message to the NM Station to report the events such as entering or quitting
the system view or restarting the device once the triggering conditions configured on each
protocol module are matched.
shows the relationship between the NM Station and the agent.
Request
Response
NMS
UDP Port 162
Trap
NMS
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
UDP Port 161
Agent
Agent
1 SNMP Configuration
1-3