Figure 1-6 Networking Diagram For Configuring Different Nmss To Access The Switch (Inform Mode) - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Figure 1-6 Networking diagram for configuring different NMSs to access the Switch (inform
mode)
1.1.1.1/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure reachable routes between the Switch and the NMSs. The configuration procedure is
not mentioned.
Step 2 Configuring basic SNMP functions
# Enter the system view, start the SNMP agent, and set the SNMP version to SNMPv3.
<Quidway> system-view
[Quidway] sysname Switch
[Switch] snmp-agent
[Switch] snmp-agent sys-info version v3
Step 3 Configure the access rights.
Issue 03 (2010-09-20)
NMS 1
NMS 2
1.1.1.2/24
Configure basic SNMP functions on the Switch, including enabling the SNMP agent and
setting the SNMP version.
Configure access rights.
Configure the Inform function.
Configure the NMSs.
SNMP version
Information about the user group and users
Information about the MIB objects
Passwords for authentication and encryption
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GE1/0/0
VLANIF100
1.1.2.1/24
IP
Network
1 SNMP Configuration
Switch
1-83