Configuring The Encryption Function For The Snmp User Group; Configuring Authentication And Encryption Functions For The Snmp User Group - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
The system view is displayed.
Step 2 Run:
snmp-agent group v3 group-name authentication
The SNMPv3 authentication function is configured.
----End
1.12.6 Configuring the Encryption Function for the SNMP User
Group
Encryption keys configured on the NM Station and the device must be identical. Otherwise, the
NM Station cannot access the device.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent group v3 group-name privacy
The SNMPv3 encryption function is configured.
----End
1.12.7 Configuring Authentication and Encryption Functions for
the SNMP User Group
NM Station users in a group can be configured with different authentication codes and encryption
keys for accessing the device.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent usm-user v3 user-name group-name authentication-mode { md5 | sha }
password privacy-mode des56 password
Issue 03 (2010-09-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-39