Configuring The Snmp Version; Configuring An Snmp User Group - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
No.
1
2
3

1.11.2 Configuring the SNMP Version

After the SNMP version is disabled on the device, to enable the NMS to access the device through
SNMPv3, you need to configure SNMPv3 on the device.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent sys-info version v3
The SNMP version is configured.
By default, SNMPv3 is configured.
----End

1.11.3 Configuring an SNMP User Group

This part describes how to create an SNMP access user group.
Context
Do as follows on the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent group v3 group-name
An SNMP user group is configured.
----End
Issue 03 (2010-09-20)
Data
SNMP group name
SNMP user name
ACL number
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-33