Enabling The Extended Error Code Function On The Snmp Agent; Establishing The Configuration Task - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
NMS type
-----------------------------------------------------------
Run the display snmp-agent inform command, and you can view the configurations of the
alarms sent in Informing mode.
<Quidway> display snmp-agent inform
Global config: resend-times 3, timeout 15s, pending 39
Global status: current notification count 0
Target-host ID: VPN instance/IP-Address/Security name
-/1.1.1.1/public:
Run the display snmp-agent notification-log info command, and you can view the logs
generated by alarms in the log buffer.
<Quidway> display snmp-agent notification-log info
Notification log information :
Notifications Admin Status: enable
GlobalNotificationsLogged: 0
GlobalNotificationsBumped: 0
GlobalNotificationsLimit: 500
GlobalNotificationsAgeout: 24
Total number of notification log: 0
1.19 Enabling the Extended Error Code Function on the
SNMP Agent
This section describes how to enable the extended SNMP error code function. After this function
is enabled, packets sent from the device to the NMS carry extended error codes. The extended
SNMP error code function is allowed only on Huawei NMS.

1.19.1 Establishing the Configuration Task

Before enabling the extended SNMP error code function, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.

1.19.2 Enabling the Extended Error Code Function on the SNMP Agent

By default, packets sent from the device to the NMS carry standard SNMP error codes. After
the extended SNMP error code function is enabled, packets sent from the device to the NMS
carry extended error codes.
1.19.3 Checking the Configuration
After the extended SNMP error code function is enabled, you can view the status of extended
SNMP error codes.
1.19.1 Establishing the Configuration Task
Before enabling the extended SNMP error code function, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
The extended error code function can help the switch to enrich the information contained in the
error codes sent to the NM station.
Issue 03 (2010-09-20)
: HW NMS
Config: resend-times 3, timeout 15s
Status: retries 0, pending 0, sent 0, dropped 0, failed 0, confirmed 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-67