Establishing The Configuration Task; Configuring Basic Snmp Functions; Configuring The Snmp Version - Huawei Quidway S9300 Configuration Manual - Network Management

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

1.9.1 Establishing the Configuration Task

Before configuring SNMPv3, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
To designate different groups for the NM Station, that is, to implement user classification on the
NM Station, configure SNMPv3.
Pre-configuration Tasks
Before configuring SNMPv3, complete the following tasks:
l
l
Data Preparation
To configure SNMPv3, you need the following data.
No.
1
2

1.9.2 Configuring Basic SNMP Functions

By default, SNMP is disabled. You can do as follows to enable SNMPv3.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent
The SNMP agent function is enabled.
----End

1.9.3 Configuring the SNMP Version

By default, the NM Station communicates with the switch through SNMPv3.
Issue 03 (2010-09-20)
Assigning an IP address to the switch
Configuring the routing protocol to make the switch and the NM Station accessible
Data
SNMP group name
SNMP user name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SNMP Configuration
1-25