Example For Configuring Different Nmss To Access The Switch - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration
# When a trap is generated, you can run the display trapbuffer command to view details about
the trap.
[Switch] display trapbuffer
Trapping buffer configuration and contents : enabled
Allowed max buffer size : 1024
Actual buffer size : 256
Channel number : 3 , Channel name : trapbuffer
Dropped messages : 0
Overwritten messages : 0
Current messages : 1
#Feb
----End
Configuration Files
The configuration file on the Switch is as follows:
#
sysname Switch
#
vlan batch 100
#
acl number 2000
rule permit source 1.1.1.1 0
#
interface Vlanif100
ip address 2.2.2.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
ospf 1
area 0.0.0.0
network 2.2.2.0 0.0.0.255
#
snmp-agent
snmp-agent local-engineid 000007DB7F000001000031E7
snmp-agent community read public acl 2000
snmp-agent community write private acl 2000
snmp-agent sys-info contact Mr.Wang-Tel:21657
snmp-agent sys-info location telephone-closet,2rd-floor
snmp-agent sys-info version v2c
snmp-agent target-host Trap address udp-domain 1.1.1.1 params securityname public
v2c
#
return
1.23.3 Example for Configuring Different NMSs to Access the
Switch
Networking Requirements
As shown in
NMS2 and the Switch. The IP address of the interface connecting NMS1 to the network is on
1.1.1.1/24; the IP address of the interface connecting NMS2 to the network is on 1.1.1.2/24. The
IP address of the Ethernet interface connecting the Switch to the network is on 1.1.2.1/24.
1-78
Group name:private
Acl:2000
Storage-type: nonVolatile
1 08:49:55 2009 Switch ENTMIB/4/TRAP:1.3.6.1.2.1.47.2.0.1 Entity MIB change.
Figure 1-5, reachable routes exist between NMS1 and the Switch, and between
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)