Figure 1-4 Networking Diagram For Configuring Vlan-Based Igmp Snooping - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast

Figure 1-4 Networking diagram for configuring VLAN-based IGMP snooping

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Create a VLAN and add interfaces to the VLAN.
<S9300> system-view
[S9300] vlan 3
[S9300-vlan3] quit
[S9300] interface gigabitethernet 3/0/1
[S9300-GigabitEthernet3/0/1] port hybrid tagged vlan 10
Issue 01 (2009-07-28)
DHCP server
IP/MPLS core
GE3/0/1
S9300
GE1/0/1
VLAN3
Host4
Host3
Create a VLAN and add interfaces to the VLAN.
Enable IGMP snooping globally and in a VLAN.
Configure a static router interface.
Configure static multicast groups 225.1.1.1, 225.1.1.2, and 225.1.1.3.
ID of the VLAN that GE 1/0/1 and GE 3/0/1 belong to, that is, VLAN 3
Static router interface GE 3/0/1
Addresses of static multicast groups, 225.1.1.1, 225.1.1.2, 225.1.1.3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Multicast source
Host5
1 Layer 2 Multicast Configuration
1-33