Checking The Configuration; Configuring Batch Statistics Collection - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration
snmp-agent packet max-size byte-count
The maximum size of the SNMP packet sent or received by the agent is configured.
----End

1.15.3 Checking the Configuration

After the maximum size of an SNMP packet is configured, you can view the configuration.
Prerequisite
The configurations of the Maximum Size of the SNMP Packet are complete.
Procedure
Step 1 Run the display current-configuration | include max-size command to view the current snmp
packet Maximum size.
----End
Example
Run the display current-configuration | include max-size command to view the current snmp
packet Maximum size.
<Quidway> display current-configuration | include max-size
snmp-agent packet max-size 1800

1.16 Configuring Batch Statistics Collection

The frequent access of the NM Station to a switch affects the switch performance. To solve this
problem, you can configure the performance batch collection function to periodically collect
data needed by the NM Station on the switch and then sends the data to the NM Station through
the File Transfer Protocol (FTP).
1.16.1 Establishing the Configuration Task
Before configuring the performance batch collection function, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
1.16.2 Enabling Batch Statistics Collection
To create a statistics file, you must enable the performance batch collection function.
1.16.3 Creating a Statistics File
Data collected by the performance batch collection function are saved in the statistics file.
1.16.4 Adding Statistics Objects into the Statistics File
Data needed by the NM Station can be saved in the statistics file only after statistics objects are
added to the statistics file.
1.16.5 (Optional) Configuring the Statistics Collection Interval
This part describes how to set the interval for collecting the switch performance. You must set
the collection interval before performing the performance batch collection function. Once the
collection is performed, you cannot modify the collection interval.
1.16.6 (Optional) Configuring the Interval of Uploading the Statistic File
1-48 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)