Checking The Configuration; Configuring The Maximum Size Of The Snmp Packet - Huawei Quidway S9300 Configuration Manual - Network Management

1 SNMP Configuration
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
snmp-agent sys-info location location
The location of the switch is configured.
----End

1.14.4 Checking the Configuration

After SNMP maintenance information is configured, you can view information about the
administrator and location of the device.
Prerequisite
The configurations of the SNMP Maintenance Information are complete.
Procedure
l
l
----End
Example
Run the display snmp-agent sys-info contact command to view the contact method of the
administrator.
<Quidway> display snmp-agent sys-info contact
Run the display snmp-agent sys-info location location command to view the location of the
switch.
<Quidway> display snmp-agent sys-info location

1.15 Configuring the Maximum Size of the SNMP Packet

This section describes how to increase the maximum size of an SNMP packet for the NM Station
to obtain the complete information about the switch status.
1.15.1 Establishing the Configuration Task
Before configuring the maximum size of an SNMP packet, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the required data. This
can help you complete the configuration task quickly and accurately.
1.15.2 Configuring the Maximum Size of the SNMP Packet
1-46
Run the display snmp-agent sys-info contact command to view the contact method of the
administrator.
Run the display snmp-agent sys-info location command to view the location of the
switch.
The contact person for this managed node:
R&D Beijing, Huawei Technologies co.,Ltd.
The physical location of this node:
Beijing China
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
Issue 03 (2010-09-20)