Configuring Network-Policy Tlv - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 4
lldp med-tlv-select
Example:
Switch(config-if)# lldp med-tlv-select
inventory management
Step 5
end
Example:
Switch(config-if)# end
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring Network-Policy TLV

SUMMARY STEPS
1. enable
2. configure terminal
3. network-policy profile profile number
4. {voice | voice-signaling} vlan [vlan-id {cos cvalue | dscp dvalue}] | [[dot1p {cos cvalue | dscp dvalue}]
| none | untagged]
5. exit
6. interface interface-id
7. network-policy profile number
8. lldp med-tlv-select network-policy
9. end
10. show network-policy profile
11. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 enable
Purpose
Enables privileged EXEC mode. Enter your password if prompted.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure LLDP, LLDP-MED, and Wired Location Service
Purpose
Specifies the TLV to enable.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
67