Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure LLDP, LLDP-MED, and Wired Location Service
Table 9: LLDP-MED TLVs
LLDP-MED TLV
inventory-management
location
network-policy
power-management
Follow these steps to enable a TLV on an interface:
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. lldp med-tlv-select
5. end
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
interface interface-id
Example:
Switch (config)# interface
gigabitethernet2/0/1

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

66
Description
LLDP-MED inventory management TLV
LLDP-MED location TLV
LLDP-MED network policy TLV
LLDP-MED power management TLV
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters global configuration mode.
Specifies the interface on which you are enabling
LLDP, and enter interface configuration mode.