Chassis Mid-Mounted Rack-Mount Bracket Installation - Cisco RFGW-10 Hardware Installation Manual

Attaching the Chassis Rack-Mount Brackets
Figure 3-6
1
1
2 Cisco RFGW-10 UEQAM chassis

Chassis Mid-Mounted Rack-Mount Bracket Installation

If you are rack-mounting the chassis using a mid-mounted configuration, then it provides for the chassis
being recessed in the rack or installed in a two-post rack.
Note
Chassis installation handles cannot be installed if the chassis is to be mid-mounted.
Cisco RF Gateway 10 Hardware Installation Guide
3-10
Attaching the Front Rack-Mount Brackets
Front rack-mount bracket
Chapter 3 Cisco RFGW-10 UEQAM Installation
2
3 Front rack-mount bracket screws
3
1
OL-16264-04