Table of Contents
Advertisement
Safety Warnings
Most safety warnings for the Cisco RF Gateway 10 are placed in relevant sections throughout the
document. For translated safety warnings, see the
Cisco RF Gateway
Warning Definition
MPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. To see translations of the warnings
that appear in this publication, refer to the translated safety warnings that accompanied this
device. Statement 1071
Note: SAVE THESE INSTRUCTIONS
Note: This documentation is to be used in conjunction with the specific product installation
guide that shipped with the product. Please refer to the Installation Guide, Configuration Guide,
or other enclosed additional documentation for further details.
Related Documentation
Your Cisco RF Gateway 10 (RFGW-10) Universal Edge Quadrature Amplitude Modulation (UEQAM)
and the Cisco IOS software running on it contain extensive features and functionality, which are
documented in the following resources:
•
•
•
•
•
Cisco RF Gateway 10 Hardware Installation Guide
4
10.
All documentation related to the Cisco RF Gateway 10 is listed in the online
Documentation
Roadmap.
The
Cisco RF Gateway 10 Quick Start Guide
contains quick reference information about chassis or parts installation.
The
Regulatory Compliance and Safety Information for the Cisco RF Gateway 10
provides international agency compliance, safety, and statutory information for the Cisco RF
Gateway 10.
Cisco IOS software documentation contains Cisco IOS software configuration information and
support. See the modular configuration and modular command reference publications in the set that
corresponds to the software release installed on your Cisco hardware.
To check the minimum software requirements of Cisco IOS software with the hardware installed on
your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify
whether modules within a system are compatible, but it does provide the minimum IOS requirements
for individual hardware modules or components.
Note
Access to this tool is limited to users with Cisco.com login accounts.
Regulatory Compliance and Safety Information for the
contains installation and configuration information. It
Cisco RF Gateway 10
document
OL-16264-04
Advertisement
Table of Contents
