Cisco Rfgw-10 Ueqam Installation Checklist - Cisco RFGW-10 Hardware Installation Manual

Rf gateway 10
Hide thumbs Also See for RFGW-10:
Table of Contents

Advertisement

Chapter 2
Preparing Your Site for Installation
Table 2-8
Cisco RFGW-10 UEQAM Shipping Container Contents List
Component
Chassis
Components
Accessories Kit
ESD, Wrist-strap (disposable)
Documentation
Note
Most Cisco documentation is online or on the Cisco Documentation DVD. Documentation that ships
with your Cisco RFGW-10 UEQAM includes the Cisco RF Gateway 10 Documentation Flyer,
Gateway 10 Quick Start Guide
Gateway

Cisco RFGW-10 UEQAM Installation Checklist

To assist you with your installation and to provide a historical record of what was done by whom,
photocopy the Cisco RFGW-10 UEQAM Installation Checklist (see
when each procedure or verification is completed. When the checklist is completed, place it in your site
log along with the other records for your new router.
OL-16264-04
Description
Cisco RFGW-10 UEQAM chassis configured with fan tray, 12
RFGW-10-RFSW1 cards, two RFGW-TCC1 cards, dual DC
PEM.
Check that the proper number and type of cards are installed for
the Supervisor Slots, and Universal RF slots. All other empty
slots should be filled with blank panels.
2 Front chassis rack-mount brackets that you will attach to the
chassis with the respective screws
Two sets of screws, one set for:
2 M5 pan head screws for NEBS chassis ground connection.
12 M5 undercut flat-head screws for rack-mount bracket
attachment to the chassis.
1 RF cable-management bracket
4 Chassis installation handle assemblies
2 Chassis rack installation brackets
10 #4 AWG wire lugs, dual hole, 90 degree
1 #6 AWG wire lug, dual hole, 90 degree
12 UCH2 cable holders for coaxial termination fixing to the RF
switch cards
4 Ferrite clips for the Supervisor console and management cables
for EMI suppression
1 RJ45 to Dsub adaptor
2 MCX to F adaptors
1 disposable wrist-strap
Regulatory Safety and Compliance Information for the Cisco RF
Gateway 10
and the
10. See also the
"Related Documentation" section on page
Cisco RFGW-10 UEQAM Installation Checklist
Regulatory Compliance and Safety Information for the Cisco RF
Cisco RF Gateway 10 Hardware Installation Guide
Received
Cisco RF
-4.
Table
2-9). Use this to indicate
2-21

Advertisement

Table of Contents
loading

Table of Contents