Cisco Rfgw-10 Ds-384 Line Card; Tcc/Dti Card - Cisco RFGW-10 Hardware Installation Manual

Rf gateway 10
Hide thumbs Also See for RFGW-10:
Table of Contents

Advertisement

Chapter 1
Overview
Table 1-11
DS-48 Line Card LEDs
LED
STATUS
ALARM
TRAFFIC
LINK
Figure 1-12
Figure 1-12

Cisco RFGW-10 DS-384 Line Card

For information about the Cisco RFGW-10 DS-384 line card, see
Line Card Hardware Installation

TCC/DTI Card

The Cisco RFGW-10 UEQAM supports two Timing, Communication, and Control (TCC) slots. The
TCC card acts as a secondary processor that controls the overall system clock generation and
distribution, DOCSIS timestamp synchronization, and system control of the Front Panel Display (FPD)
and the RF Switch cards.
The TCC card's most critical function is distribution of the system clocking, in particular the DTI
interface. The TCC card is a DTI client interface. It supports dual DTI external input allowing DTI server
redundancy. Based on the DTI input information, the TCC card generates DOCSIS 10.24-MHz clock and
timestamp information to every line card in the chassis. All clocks and DOCSIS information are
redundant. When there is no external DTI clock, the TCC provides an internal DOCSIS DTI clock and
time stamp reference.
When two TCC cards are installed, they are configured as active and backup (redundant). If the TCC
card in the first slot is working at system power-up, it automatically becomes the active card and the TCC
card in the second slot becomes the backup card (typically Slot 13 boots as the primary TCC and Slot
14 as the secondary, but this is not mandatory).
OL-16264-04
Color/Status
Green
Off
Blank
Yellow
Red
Green
Blue
Red
Green
Blank
shows the DS-48 faceplate.
DS-48 Line Card Faceplate
Guide.
Description
Line card is powered correctly and has initialized correctly
Line card is not initialized correctly, not booted up
Normal operation
Minor line card error
Major line card error
Line card is active and traffic is processed by the card
Slot [11:12]: Card is configured as backup card
Slots[3:10]: Card has failed over to protect slot
The Link is operational
The link is not operational
Cisco RF Gateway 10 Downstream 384
Cisco RF Gateway 10 Hardware Installation Guide
Cisco RFGW-10 Components
1-23

Advertisement

Table of Contents
loading

Table of Contents