Rack-Mounting the Chassis
Rack-Mounting the Chassis
Your chassis ships with a pair of brackets for use with a 19-inch rack or mounting on the wall. The
bracket is shown in
Figure 3-2
Mounting Screws
Two sets of mounting screws are provided, in separate packages. Take care to use each screw type, and
washers as needed, in the appropriate locations.
rack-mounting and wall-mounting screws.
Table 3-1
Rack-mounting
•
•
Cisco VG224 Voice Gateway Hardware Installation Guide
3-6
Figure
3-2.
Quick Mounting Bracket
Rack-Mounting Versus Wall-Mounting Screws
Eight countersunk Phillips head screws (four
per bracket)
Washers are not required
Chapter 3
Installing the Cisco VG224 Voice Gateway
Table 3-1
clarifies the differences between
Wall-mounting
Four 6–32 slotted hex screws (two per
•
bracket) and four plastic washers
Washers are required
•
OL-5006-04