Table of Contents
Advertisement
Introduction
Introduction
About this document
This document describes how to install a Cisco Expressway CE500 appliance into your video network. It
contains information on:
Preparing the installation
n
Installing the hardware
n
Performing initial configuration
n
Troubleshooting the installation
n
The Cisco Expressway appliance is based on the UCS C220 M3L. For more detailed information on installing
this appliance see
Cisco UCS C220 Server Installation and Service
About the Cisco Expressway appliance
The Cisco Expressway appliance described in this document is a CE500, which is based on a UCS C220
M3L.
The appliance supports Cisco Expressway version X8.1.1 or later. Note that the CE500 model does not
support the scalability solution introduced in the X8.1 release.
The following table lists the components for the appliance:
Item
Chassis
Processor
RAM
Hard Disk
Onboard SAS Controller
NIC
PSU
TPM
Miscellaneous
The only field replaceable component is the PSU.
Note: the hard disks must not be removed.
To initiate a Return Material Authorization (RMA) go to
info/or3/o32/Return_a_Product/WebReturns/product_Online_web_returns.html.
Cisco Expressway CE500 Appliance Installation Guide (X8.5)
Part
UCSC-C220-M3L
UCS-CPU-E5-2643 (3.30 GHz / 4 Core - Hyper threaded)
UCS-MR-1X082RY-A (8 GB)
UCS-HDD1TI2F212 (1TB NL SAS Disk LFF)
SAS support provided by UCSC-RAID-ROM1
N2XX-ABPCI01-M3 (Broadcom 5709 Dual Port 1 Gb)
UCSC-PSU-650 W & Power cable
UCSX-TPM1-001 (Trusted Platform Module)
UCSC-BBLKD-L (HDD filler panel)
UCSC-HS-C220M3 (Heat Sink)
UCSC-RAIL1 (Rail Kit)
UCSC-PCIF-01H (Half height PCIe filler)
UCSC-PSU-BLKP (Power supply blanking panel/filler)
http://www.cisco.com/web/ordering/cs_
Guide.
Quantity
1
1
2
2
1
1
1
1
3
1
1
1
1
Page 3 of 16
Advertisement
Table of Contents
