Table of Contents
Advertisement
The subnet mask option displays the subnet mask address. It is set during the
create-cluster operation.
Gateway
The gateway address is set when the cluster is created.
The gateway option displays the gateway address.
Recover cluster?
The Recover cluster? option is useful if the administrator password has been lost or
forgotten.
This field allows you to recover a lost administrator password or make the node
accessible via the service password.
Figure 40 shows the Recover cluster? menu sequence.
Figure 40. Recover Cluster? menu sequence
During installation, you do not need to use this field. For more information about
this field, see the IBM TotalStorage SAN Volume Controller: Service Guide.
Node options
The node option displays the identification number or name of the SAN Volume
Controller.
The main node option displays the identification number of the SAN Volume
Controller or the name of the SAN Volume Controller if the user has assigned a
name.
Status
Use the status to diagnose cluster failures.
Active
v The SAN Volume Controller is operational and assigned to a cluster. It has
Inactive
v The SAN Volume Controller is operational and assigned to a cluster. It does not
Free
Recover Cluster?
Select
Service Access
Related reference
"Status"
Use the status to diagnose cluster failures.
"Create cluster?" on page 66
Clusters can be created from the Create Cluster menu.
access to the fibre channel fabric.
have access to the fibre channel fabric.
Chapter 4. Using the front panel display on the SAN Volume Controller
65
Advertisement
Table of Contents
