Danger Notices For The San Volume Controller; Caution Notices For The Uninterruptible Power Supply - IBM TotalStorage SAN Volume Controller Installation Manual

Table of Contents

Advertisement

Use the reference numbers in parentheses, for example (1), at the end of each
notice to find the matching translated notice. For the translation of the danger,
caution, attention notices, and the translation of the safety labels, see the IBM
TotalStorage SAN Volume Controller: Translated Safety Notices.
DANGER
DANGER
DANGER
DANGER
DANGER

Danger notices for the SAN Volume Controller

Ensure that you are familiar with the danger notices on the SAN Volume Controller.
Use the reference numbers in parentheses, for example (1), at the end of each
notice to find the matching translated notice. For the translation of the danger,
caution, attention notices, and the translation of the safety labels, see the IBM
TotalStorage SAN Volume Controller: Translated Safety Notices.
DANGER

Caution notices for the uninterruptible power supply

Ensure that you understand the caution notices for the uninterruptible power supply
(UPS).
Use the reference numbers in parentheses, for example (1), at the end of each
notice to find the matching translated notice. For the translation of the danger,
An electrical outlet that is not correctly wired could place a hazardous
voltage on the metal parts of the system or the products that attach to the
system. It is the customer's responsibility to ensure that the outlet is
correctly wired and grounded to prevent an electrical shock. (1)
To prevent possible electrical shock during an electrical storm, do not
connect or disconnect cables or station protectors for communications
lines, display stations, printers, or telephones. (2)
Do not attempt to open the covers of the power supply. Power supplies are
not serviceable and are replaced as a unit. (3)
To prevent a possible electrical shock when installing the device, ensure
that the power cord for that device is unplugged before installing signal
cables. (4)
The UPS contains lethal voltages. All repairs and service should be
performed by an authorized service support representative only. There are
no user serviceable parts inside the UPS. (5)
Do not try to open the covers of the power supply assembly (32).
xvii
About this guide

Advertisement

Table of Contents
loading

Table of Contents