Table of Contents
Advertisement
Controls and indicators for the SAN Volume Controller
Controls and indicators are located on the front panel of the SAN Volume Controller.
All the controls for the SAN Volume Controller are located on the front panel.
Power button
The power button switches the main power to the SAN Volume Controller on or off.
To turn on the power, press and release the power button.
To turn off the power, press and release the power button.
"SAN Volume Controller connectors" on page 11
The external connectors for the SAN Volume Controller can be located easily.
"Preparing your SAN Volume Controller environment" on page 12
Before installing the SAN Volume Controller, prepare the physical environment.
1
3
2
2145
1
Power button
2
Power LED
3
Check LED
4
Navigation buttons
5
Select button
6
Front panel display
7
Label
Related reference
"Power button"
The power button switches the main power to the SAN Volume Controller on or
off.
"Power LED" on page 6
The green power LED indicates the power status of the SAN Volume Controller:
"Check LED" on page 6
This is an amber LED used to indicate critical failures on the service controller.
"Navigation buttons" on page 6
Use the navigation buttons to move through menus.
"Select button" on page 6
Use the select button to select an item from a menu.
"Front panel display" on page 7
The front panel display shows service, configuration, and navigation information.
"Node identification label" on page 7
The node identification label on the front panel displays a six-digit node
identification number.
4
5
6
Chapter 1. Overview of the SAN Volume Controller
7
5
Advertisement
Table of Contents
