Show Auto-Copy-Sw - Dell N1100-ON Reference Manual

console(config)#no boot host retry-count

show auto-copy-sw

Use the show auto-copy-sw command to display Stack Firmware
Synchronization configuration status.
Syntax
show auto-copy-sw
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The show switch command also displays the switch firmware synchronization
status.
Example
console#show auto-copy-sw
Stack Firmware Synchronization
Synchronization:
SNMP Trap status:
Allow Downgrade:
show boot
Use the show boot command to display the auto install configuration and the
status.
Syntax
show boot
Enabled
Enabled
Enabled
Switch Management Commands
1835