Installing The Camshafts (125 Duke) - KTM 125 DUKE EU Repair Manual

16 ENGINE

16.5.24 Installing the camshafts (125 Duke)

–
Mount dowels
–
Put on cylinder head gasket
–
Mount the cylinder head.
304740-11
–
Mount screws
Guideline
Cylinder head screw
304739-11
–
Mount and tighten screws
Guideline
Cylinder head screw
304444-11
–
Turn the crankshaft clockwise until markings
304443-10
–
Pull up the timing chain and insert exhaust camshaft
–
Place the timing chain over the camshaft gear of the intake camshaft.
Markings
304442-10
.
2
.
3
with the washer and tighten in a crisscross pattern.
4
M10
.
5
of the camshafts align with the edge of the cylinder head.
A
Step 1 Thread is oiled,
head flat is
20 Nm
(14.8 lbf ft) greased
Step 2
40 Nm
(29.5 lbf ft)
M6 12 Nm (8.9 lbf ft)
and align.
1 2
.
3
170